Primary LED Color / Dimming Options - Small Mirrors (Test)
Please note that some of the options described may not be available for your mirror based on the LED mirror style and size.
LED Color Temperature Options
Our LED mirrors come standard with LED strips with 6000 Kelvin LED strips. This color temperature produces "natural daylight lighting conditions for makeup and grooming. We also offer an option to change the LED to a 3000 Kelvin color temperature, which provide a warmer, slightly yellowish light more like a standard incandescent light bulb (see Image A). Color temperature selection does not impact LED brightness, and is a matter of personal taste and matching to other lighting and décor.
LED Brightness Options (adding a 2nd LED strip)
Our LED strips (both 3000 and 6000 Kelvin) include 120 high-output LEDs per meter to provide just the right amount of brightness to frame the subject standing in front of the mirror. However, we also offer the option to add a 2nd LED strip to effectively double the brightness output of your 6000 Kelvin or 3000 Kelvin lighting (see Image B). Alternatively, you can add a 3000 Kelvin strip to your standard 6000 Kelvin strip to allow switching between two different color temperatures. Our LED upgrades are combined with our dimming upgrades to allow selection of multiple different LED/dimming solutions.
LED Dimming Control Options
Our mirrors are not dimmable in their standard configuration; they are designed to provide optimal lighting conditions for the person standing in front of the mirror without needing a dimmer control. However, we do offer two dimming upgrades if you wish to be able to dim your LED lighting, and if you add an LED to double the brightness, we do recommend also adding a dimming upgrade. Please note that whether you purchase standard brightness or 2x brightness, your entire LED lighting will be configured with the same dimming control selection.
- We offer an upgrade to your mirror power regulator (see Image C) to support dimming control from a compatible wall dimmer switch (wall dimmer switch not included).
IMPORTANT: This option requires 2 sets of Romex wires to control both house power and low voltage input to your LED mirror from each wall dimmer switch (for Dual 3000 Kelvin + 6000 Kelvin upgrade, you would need 4 sets of Romex wires based on 2 wall dimmer switches). This solution also requires a Leviton IP710 DLZ or compatible low-voltage (0-10VDC) wall dimmer switch. Please click here for special wiring instructions. This option is available with both single and dual LED strip configurations.
- Our Remote Control On/Off/Dimming option (see Image D) will allow you to turn your LED mirror on and off and dim your mirror lighting via a remote controller device. This upgrade is optimal for scenarios where a wall switch is not available or if you wish to control multiple sources of LED lighting with a single controller (a controller can be programmed to control up to 4 LED light sources). This upgrade includes a remote-control device (2 AAA batteries included) and a pre-installed remote receiver connected to each LED power regulator (number of remote receivers depends on mirror size and number of LEDs). This option is available with both single and dual LED strip lighting options.
- Our Touch On/Off Dimming option (see image E) will allow you to turn your LED mirror on and off and dim your mirror lighting via a touch switch that is mounted directly on the frame of the mirror. If your mirror comes standard with a toggle switch, the touch / dimming switch will replace the toggle switch. This option is not available on our side-lighted mirrors and some of our front-lighted mirrors. This option is available in combination with both single and dual LED strip lighting options.
We are happy to consult on your choice of upgrade options, to ensure that you get the exact results that you are looking for! Call us at 937-810-0200 M-F 9 am to 5 pm EST.